Wall spacers – set of 6
Silver
€18,00
Skip to product information
Wall spacers – set of 6
€18,00
Taxes included.
Shipping calculated at checkout.
RAL codes are for guidance: on-screen colours are approximate. Custom colour: choose the Custom finish, then enter your RAL reference in the “Your RAL reference” field that appears just below.
Magnets and mounting screws not included.
Description
Fix your Metal Memory photo board to the wall with a 2 cm gap between the photo board and the wall: a nice floating effect, with a soft shadow behind the plate.
This set of 6 is intended for the large 150 x 120 cm size, delivered in 2 panels: 6 holes of Ø 10 mm, 2 of which straddle the line where the two panels meet. For the small and medium sizes (4 holes), choose the set of 4.
This set is available in three finishes: silver, matte black and brushed gold.
What's in the set
- 6 metal wall spacers in the finish of your choice, clear washers included
- 6 screws 4 x 30 mm and 6 wall plugs
Dimensions
- Diameter: Ø 19 mm
- Spacer body: 20 mm
- Gap between the photo board and the wall: 2 cm
Installation in 6 steps
- Mark the 6 fixing points, using a spirit level.
- Drill 6 mm holes.
- Push in the wall plugs.
- Screw the body of each spacer onto its plug with the 4 x 30 mm screw.
- Place the two panels of the photo board against each other and against the spacers, with a clear washer on each side of the photo board.
- Screw the heads into the spacers through the photo board, then tighten, alternating between the fixing points.
You will need: a drill and a screwdriver.
Learn more: Frequently asked questions · Quality and recyclability